Two channels become three contact points. That, in a nutshell, is what the
E-Stim Systems TriPhase Cable with Adapters does, but behind that simple principle lies a remarkably versatile expansion for electroplay. The TriPhase Cable Set combines the two separate output channels of a compatible dual-channel E-Stim powerbox and distributes them across
three contact points. This allows the signals from both channels to influence each other, creating a more dynamic interaction between multiple electrodes.
E-Stim Systems describes the result as an almost
3D-like e-stim experience. Whereas a conventional bipolar setup operates between two contact points, TriPhase introduces a third point into the play area. This gives the electrical stimulation more opportunities to vary between different contact zones. No extra powerbox is needed—just a smart cable set that lets two channels work together in a completely different way.
What exactly does a TriPhase cable do?
A device like the
E-Stim Systems 2B has two isolated output channels that are normally used independently of each other. For example, you can connect a separate bipolar electrode to each channel and set both channels individually.
The TriPhase Cable Set takes a different approach. According to E-Stim Systems, the cable converts the
two isolated outputs into three non-isolated contact points. The signals from channel A and channel B are combined in the process, creating interaction between the various connected contact points.
That is also the reason for the name TriPhase. Instead of two completely separate circuits, a configuration with three contact points is created in which both output channels play a role. The cable therefore does not create a third independent channel; it uses the two existing channels in a different way.
Why does E-Stim Systems refer to a 3D sensation?
With three separate contact points, there is greater variation in how the signals are felt. Both channels can produce different settings, and those signals converge within the TriPhase setup. As a result, the sensation can change when you adjust the settings of either channel.
E-Stim Systems itself uses the analogy of a
3D experience to describe this. You shouldn’t take this literally as a separate technical mode of the powerbox. It describes the more complex sensation that can arise when two channels and three contact points work together simultaneously.
Designed for the 2B, but not exclusively for the 2B
The
E-Stim Systems TriPhase Cable was specifically developed for use with the
E-Stim Systems 2B. This powerbox has two fully isolated output channels with independent control, making it an ideal foundation for TriPhase.
According to E-Stim Systems, the cable is also compatible with the original Series 2 and the
ElectroPebble. You therefore need a compatible E-Stim controller with the proper dual-channel functionality; the TriPhase Cable Set itself is not a power source and does not generate electrical impulses.
Three Electrodes or One Triple Electrode
TriPhase can be configured in various ways. You can combine separate compatible electrodes to create three contact points. E-Stim Systems states that the majority of its electrodes can be used within a TriPhase configuration.
In addition, the manufacturer has developed the
Tripple Electrodes specifically for this system. These insertable electrodes have not the usual two, but
three separate electrical contact zones. With a TriPhase Cable, those three zones can be connected from a single electrode.
This makes the system modular. Sometimes you can build a configuration with various individual electrodes; other times, you can use a single Tripple electrode with three contacts. The cable acts like an interchange for electrical signals: the same two paths come in, but then there are suddenly three directions to experiment with.
Compatible with both 2 mm and 4 mm electrodes
A major practical advantage is that the TriPhase Cable Set comes with
4 mm-to-2 mm adapters. This means you’re not limited to electrodes with just one type of connector.
E-Stim Systems’ premium insertable electrodes typically use robust
4 mm connectors. Self-adhesive pads and various other electrodes, on the other hand, use the smaller
2 mm/TENS connector. With the included adapters, 4 mm and 2 mm contacts can be combined within a TriPhase configuration.
This provides a great deal of flexibility when setting up a configuration. Before use, however, always check which type of connector each electrode has and follow E-Stim Systems’ connection diagrams and instructions.
For users who want to get more out of two channels
The TriPhase Cable Set is particularly useful if you’re already familiar with the basics of electroplay and want to experiment further with multiple contact points. The system does not add any extra power to the powerbox. The added value lies in the
interaction between both channels and three contact zones.
Changes in intensity, program, and settings on the powerbox can therefore have a different effect than in a simple two-point setup. Therefore, when trying a new configuration, always start at a low intensity, even if you’re already familiar with your 2B or another compatible controller.
Experimenting Safely with TriPhase
Three contact points also mean you need to be especially careful about placement. E-Stim Systems recommends keeping electroplay
below the waist and never using e-stim around the head or neck. Avoid configurations where electrical signals can travel through the chest area.
Connect the cables and electrodes before increasing the intensity. Set both channels to a low level first, then gradually increase the intensity. Because the signals interact with each other within a TriPhase configuration, a change to one channel can alter the overall sensation.
Stop immediately if the stimulation becomes sharp, burning, painful, or otherwise unpleasant. Do not use e-stim during pregnancy, if you have epilepsy, a heart condition, or electronic implants such as a pacemaker or insulin pump, and always follow the safety instructions for the E-Stim powerbox you are using.
General Features
- Brand: E-Stim Systems
- Product: TriPhase Cable Set
- Type: TriPhase cable set for electroplay
- Converts two isolated output channels into three non-isolated contact points
- Combines signals from both channels
- Designed for dynamic, almost 3D-like stimulation
- Designed for use with the E-Stim Systems 2B
- Also suitable for the original E-Stim Systems Series 2
- Compatible with E-Stim Systems ElectroPebble
- Suitable for use with E-Stim Systems Triple Electrodes
- Can also be combined with other compatible electrodes
- Includes adapters for 2 mm/TENS connectors
- Suitable for combinations of 2 mm and 4 mm electrodes
- 12-month manufacturer’s warranty according to E-Stim Systems’ terms and conditions
FAQ
What does the E-Stim Systems TriPhase Cable with Adapters do?The TriPhase Cable Set uses the two isolated output channels of a compatible dual-channel E-Stim controller to create three non-isolated electrical contact points. This allows the signals from both channels to interact with each other within the same configuration. E-Stim Systems describes the resulting sensation as an almost 3D-like e-stim experience.
Do I need an E-Stim Systems 2B for the TriPhase Cable with Adapters?Not exclusively. The cable is specifically designed for the dual-channel E-Stim Systems 2B, but E-Stim Systems also lists compatibility with the original Series 2 and ElectroPebble. The TriPhase cable always requires a compatible controller and does not function on its own.
Can I connect 2 mm and 4 mm electrodes to the E-Stim Systems TriPhase Cable with Adapters?Yes. The set comes with 4 mm-to-2 mm adapters. This allows you to create various combinations with electrodes that use 4 mm connectors or 2 mm/TENS connectors.
Do I need special electrodes for the E-Stim Systems TriPhase Cable with Adapters?Not necessarily. E-Stim Systems states that most compatible electrodes can be used with TriPhase. The manufacturer has also developed the special Triple series. These electrodes feature three contact zones and can therefore be used with a single TriPhase Cable as a complete three-point setup.
The
E-Stim Systems TriPhase Cable with Adapters is therefore not just an ordinary adapter cable, but an extension that allows two channels to work together in a completely different way. Three contact points, two signals, and plenty of room to explore new configurations. We ship the set quickly and in completely discreet packaging.
