E-Stim Systems - OMG Torpedo Electrode - Bipolar Plug

The name is certainly no exaggeration this time. The E-Stim Systems OMG Torpedo Electrode is a massive bipolar electrode with a diameter of no less than 75 mm, a total length of 175 mm, and a weight of 1,558 grams. Originally, E-Stim Systems even produced the OMG as a demonstration model. However, customers kept asking if they could actually buy it. The answer eventually became yes—and so a striking showpiece evolved into a fully functional electrode within the Torpedo Family.
With an insertable length of 120 mm and a circumference of approximately 235 mm, the OMG is explicitly intended for very experienced users who are specifically looking for an extreme size. At the same time, this is not just an oversized metal plug that happens to conduct electricity. The OMG is designed as a true bipolar e-stim electrode, with two contact areas and two recessed 4 mm connectors in the base. Large, heavy, and technically sophisticated—you simply can’t call it a “little torpedo” anymore, even with the best will in the world.

The Giant of the Torpedo Family

The OMG is part of the E-Stim Systems Torpedo Family. This series includes the Small Torpedo, Large Torpedo, and Stuffer, after which the OMG represents a massive leap in size. Only the even larger Decimator surpasses it within the current lineup.
The Torpedo electrodes share a recognizable design principle. A large portion of the mass is concentrated in the rounded head, while the lower section is narrower. The base features a contoured edge that provides extra grip when handling the electrode.
With the OMG, those proportions are scaled up to an exceptional size. The diameter is 75 mm, resulting in a circumference of approximately 235 mm. This definitely isn’t an electrode to tackle without experience.

175 mm long and over one and a half kilograms

A few figures actually tell half the story when it comes to the OMG. The total length is 175 mm, of which a maximum of approximately 120 mm is insertable. The weight is no less than 1,558 grams.
You’ll immediately notice that weight when handling it. While smaller aluminum electrodes can feel surprisingly light, the OMG literally tips the scales at well over one and a half kilograms. E-Stim Systems even makes a dry joke on its own product page, warning you not to drop it on your foot when disassembling it. At 1,558 grams, that seems like excellent advice to us.

Bipolar: Both Contacts in a Single Electrode

The E-Stim OMG is a bipolar electrode. This means both electrical contact points are located within the same unit. You don’t need to use a separate second electrode to create a complete circuit.
As with the other Torpedo models, E-Stim Systems uses a top-bottom contact design instead of two contact zones positioned directly next to each other. This creates a distance between the two electrical poles along the electrode.
This design is characteristic of many premium insertables from E-Stim Systems. The manufacturer has deliberately incorporated a significant amount of mass into the head, while the contact areas are positioned in such a way that movement can affect the relationship between the two contact points.

Two recessed 4 mm connectors

At the base of the OMG are two 4 mm sockets. To connect it to an E-Stim Systems powerbox, you’ll need a suitable cable with two 4 mm plugs. This cable is not included with the electrode as standard.
The connectors are recessed into the base. Within the Torpedo series, both a standard 4 mm cable and a 4 mm Low Profile cable can be used. The Low Profile version protrudes less and can therefore be more practical when an electrode remains in place.

E-Stim Powerbox Recommended

With this electrode, E-Stim Systems makes an important exception compared to many smaller models. Due to its enormous mass and large contact surface, the manufacturer recommends using the OMG exclusively in combination with an E-Stim Systems control unit.
According to E-Stim Systems, a conventional TENS unit lacks sufficient power to drive this very large electrode as intended. Anyone purchasing the OMG would therefore be wise to also consider the controller they will be using when making their choice.

Designed for highly experienced users

With a diameter of 75 mm, the OMG is definitely not an entry-level model. By comparison, the Large Torpedo has a diameter of 50 mm. The OMG adds another 25 mm to that, resulting in a circumference of approximately 235 mm.
This requires a great deal of experience with large insertables, a gentle approach, and ample preparation. Never use force to insert the electrode. With the OMG, patience isn’t just a polite recommendation in the user manual—it’s simply part of responsible use.

Water-based lubricant and good conductivity

E-Stim Systems recommends a water-based lubricant, such as its own ElectroGel. Such a product facilitates both smooth insertion and good electrical contact between the electrode and the body.
The manufacturer strongly advises against using silicone-based or hybrid lubricants with these electrodes.
Connect the OMG while the power box is turned off. Set the intensity to the lowest setting before turning on the device, then gradually increase the level. E-Stim Systems recommends using e-stim below the waist and avoiding applications around the head and neck.

Dismountable for thorough cleaning

Despite its impressive size, the OMG can be taken apart for cleaning. First, turn off the power box, disconnect the cable, and then remove the electrode.
E-Stim Systems recommends mild, fragrance-free soap, a suitable toy cleaner, or a cleaning solution designed for this purpose. Carefully clean all surfaces, seams, and grooves, and rinse away any remaining cleaning solution thoroughly. Do not use alkaline or caustic cleaning products.
For additional disinfection, the manufacturer recommends wiping the electrode with 70% isopropyl alcohol. The metal parts can also be boiled or steam-sterilized, although this may cause slight discoloration. Allow all parts to dry completely before reassembling and storing the OMG.

Built to Last

E-Stim Systems’ premium insertable electrodes are manufactured in the company’s own workshop in the United Kingdom. The OMG is also part of this high-quality product line.
After use and cleaning, it can be stored back in the included reusable protective sleeve. The electrode is also covered by E-Stim Systems’ lifetime warranty for the original purchaser, subject to the manufacturer’s terms and conditions. A fitting promise for a product that resembles a metal heirloom more than a disposable item.

General Specifications

• Brand: E-Stim Systems
• Model: OMG
• Series: Torpedo Family
• Type: bipolar insertable electrode
• Total length: 175 mm
• Insertable length: 120 mm
• Diameter: 75 mm
• Circumference: approximately 235 mm
• Weight: 1,558 grams
• Top-to-bottom contact design
• Two electrical contact areas in a single electrode
• Two recessed 4 mm sockets in the base
• Compatible 4 mm cable required
• Cable not included
• E-Stim Systems powerbox recommended
• According to the manufacturer, not suitable for use with a conventional TENS unit
• Can be disassembled for thorough cleaning
• Comes in a reusable protective sleeve
• Manufactured in the United Kingdom
• Lifetime E-Stim Systems warranty for the original purchaser, subject to warranty terms
• Designed for highly experienced users of large insertables

FAQ

How big is the E-Stim Systems OMG Torpedo Electrode?
The OMG has a total length of 175 mm, a maximum insertable length of 120 mm, and a diameter of no less than 75 mm. The circumference is approximately 235 mm, and the electrode weighs 1,558 grams. This makes it an extremely large insertable electrode for highly experienced users.
Is the E-Stim Systems OMG Torpedo Electrode bipolar?
Yes. The OMG is a fully functional bipolar e-stim electrode. Both electrical contact areas are located within the same electrode. The Torpedo Family uses E-Stim Systems’ signature top-bottom contact design.
What cable and controller do I need for the E-Stim Systems OMG Torpedo Electrode?
The OMG has two 4 mm sockets in the base and therefore requires a compatible cable with 4 mm plugs. The cable is sold separately. Due to its unique size, E-Stim Systems recommends using the OMG with its own E-Stim control unit. According to the manufacturer, a conventional TENS unit does not provide sufficient power for this electrode.
How do I clean the E-Stim Systems OMG Torpedo Electrode?
Turn off the device, disconnect the cable, and disassemble the OMG. Carefully clean the parts with mild, fragrance-free soap, a suitable toy cleaner, or a designated cleaning solution. Rinse thoroughly and let everything dry completely before reassembling the electrode and storing it in the protective case.
The E-Stim Systems OMG Torpedo Electrode started out as a demonstration model and ended up as one of E-Stim Systems’ most impressive, fully functional electrodes. With a 75 mm diameter and over one and a half kilograms of metal, the name “OMG” truly lives up to its reputation. We ship this heavyweight quickly and completely discreetly in neutral packaging.