The two gold-plated contact points are located opposite each other within the same clamp. As soon as the E-Clip is inserted, both sides of the electrical circuit are thus directly opposite each other—a second separate electrode is not required.
This makes the E-Clip fundamentally different from a standard electrical alligator clip. Such a conventional clip is typically monopolar and requires a second contact elsewhere. The Bipolar E-Clip handles both contacts on its own. Add to that the adjustable clamping force limiter, and you have a small E-Stim accessory with a pretty clever design.
What is a Bipolar E-Clip?
E-Stim Systems describes the E-Clip as a
bipolar surface electrode. It is intended for skin play: the electrode is clamped onto the body rather than inserted.
On the inside of the clamp are two separate conductive contact points. The body part between the two contacts completes the circuit. As a result, the current does not need to return via a second electrode elsewhere on the body.
This makes the E-Clip compact and easy to use. A single clamp forms the entire electrical play area.
Two gold-plated contact points
The E-Clip’s two electrical contacts are
gold-plated. They face each other, so that the clamped body part is positioned between the two contact zones.
It is precisely this arrangement that makes the E-Clip bipolar. The current flows locally between the two contact points instead of taking a much longer route to a separate return electrode.
The result is a concentrated form of surface e-stim. A small device, a short distance between the contacts, and little room for the electrical current to wander off course.
Adjustable Clamping Force
With an electrical clamp, it’s not just the electrical intensity that matters. The mechanical pressure also determines how the device feels during use. That’s why the E-Clip is equipped with an
adjustment screw that allows you to limit the maximum clamping force.
This is especially useful for sensitive body parts. First, set the clamp loosely and check the mechanical pressure before turning on the power box. Afterward, you can increase the electrical intensity separately and gradually.
However, more pressure does not automatically mean better electrical conductivity. The clamp must make stable contact, but it does not need to be tightened so firmly that it restricts blood flow.
No second electrode needed
One of the biggest practical advantages is the bipolar design. With a monopolar electrode clamp, you always need a second contact point to complete the electrical circuit. This could be, for example, a second clamp, a conductive rubber loop, or another suitable electrode.
With the
Bipolar E-Clip, both contacts are already integrated into the same clip. Position the E-Clip correctly, and both sides of the circuit will be directly opposite each other.
This makes it ideal when you’re seeking a very localized electrical effect without having to position a second electrode elsewhere.
Targeted e-stim for skin play
The E-Clip is one of E-Stim Systems’ surface electrodes. The clip can be used on suitable body parts as long as both gold-plated contact surfaces make good contact.
Thanks to the adjustable clamping force, you can combine the mechanical sensation with electrical stimulation. Always start by positioning the clip physically first. Only once the clip is comfortable and secure should you connect the power box and gradually increase the intensity starting from the lowest setting.
Precisely because the electrical contact areas are small, the sensation can feel more concentrated than with large surface electrodes. A setting that feels mild with large pads may not produce the same result with a small contact area.
Do not confuse these with the E-Stim Crock Clips
E-Stim Systems also sells
Crock Clips, but technically they are not the same product. A Crock Clip is a monopolar electrode: a single clip forms only one contact point and therefore requires a second electrode to complete the circuit.
The E-Clip, on the other hand, has
two contacts in a single clip and is therefore bipolar.
That distinction may seem minor when both products are side by side, but electrically, it is fundamental. With the E-Clip, everything takes place between the two contact surfaces of the same clip.
Position First, Then Apply Power
Turn off the power box before connecting and positioning the E-Clip. Then adjust the clamping force. The clip must be tight enough to hold both contacts securely against the body without applying unnecessary pressure.
After placement, check both contact points and set the power box’s intensity control to minimum. Only then should you turn it on and slowly increase the intensity.
Want to reposition the E-Clip? First, reduce the intensity and turn off the power box. Moving an electrode while an active signal is present can cause sudden, sharp sensations.
Clamping force is clamping force
In addition to the standard safety rules for e-stim, mechanical pressure also warrants attention. A clamp can affect local blood flow if it is applied too tightly or remains in the same spot for too long.
Therefore, check the skin regularly and remove the E-Clip immediately if you experience numbness, unusual discoloration, swelling, cold skin, sharp pain, or other obvious discomfort.
The adjustment screw is there precisely to maintain control. Don’t treat it as a volume knob for mechanical discomfort; the goal is a stable placement.
Important when using around the nipples
Due to its design, the Bipolar E-Clip may be suitable for various forms of skin play, including use on the nipples. However, an important e-stim rule applies here:
never allow an electrical current path to run through the chest area.
The advantage of a correctly placed bipolar E-Clip is that both electrical contacts are located close together within the same clip. Use it strictly in accordance with the safety instructions provided by E-Stim Systems and your powerbox.
E-Stim advises beginners to keep electrical contacts below the waist. Do not use e-stim around the head and neck, or if you have a pacemaker, other electronic implants, certain heart conditions, epilepsy, or are pregnant. If you have any medical concerns, consult a doctor beforehand.
General Features
- Brand: E-Stim Systems
- Product: Bipolar E-Clip
- Type: bipolar surface electrode / electro-clamp
- Designed for E-Stim skin play
- Two electrical contact points in a single clamp
- No separate second electrode required
- Two gold-plated contact surfaces
- Electrical circuit runs locally between both contact zones
- Adjustable clamping force limit
- Mechanical pressure and electrical intensity can be adjusted separately
- Targeted electrical stimulation on a relatively small contact area
- Not the same as a monopolar Crock Clip
- For use with a compatible E-Stim power box and connection cable
- Power box not included
FAQ
What is the E-Stim Systems Bipolar E-Clip Bipolar Electro Clip?The Bipolar E-Clip is a surface electrode with two separate electrical contact points in the same clip. The body part on which the E-Clip is placed is located between the two contacts, allowing the clip to form a complete electrical circuit on its own.
Does the E-Stim Systems Bipolar E-Clip Bipolar Electrode Clip require a second electrode?No. This is precisely the difference between the Bipolar E-Clip and a standard monopolar electrode clip. Both required contact points are located within the E-Clip itself. A separate return electrode is therefore not necessary.
Can I adjust the clamping force of the E-Stim Systems Bipolar E-Clip?Yes. The E-Clip features an adjustment screw that allows you to limit the maximum clamping force. Carefully adjust the mechanical pressure before activating the electrical stimulation, and regularly check the skin and blood circulation during use.
What is the difference between the E-Stim Systems Bipolar E-Clip and E-Stim Crock Clips?The Bipolar E-Clip has two electrical contacts in a single clip and can therefore form a complete circuit on its own. A conventional Crock Clip is monopolar equipment and provides only one electrical contact point. Therefore, a second suitable electrode is always required.
The
E-Stim Systems Bipolar E-Clip proves that a complete e-stim circuit can be surprisingly compact: two gold-plated contacts, adjustable clamping force, and everything combined into a single, purpose-built electrode. Order it from Erotiekvoordeel.nl, and we’ll ensure fast, careful, and completely discreet shipping.
