A small part, a big difference. The
E-Stim Systems 10 mm Snap Adapters connect electrodes with a
10 mm snap connector to e-stim cables with
4 mm banana plugs. You get two adapters, so you can, for example, connect the E-Stim Systems Electro Cock Straps to a compatible 4 mm cable and power box.
The principle is simple: snap the 10 mm side onto the electrode’s snap connector, then insert the cable’s 4 mm plug into the adapter. No complicated electronics and no tangled mess of adapter cables—just a compact bridge between two different connection standards.
From 10 mm snap to 4 mm plug
Different electrodes use different connectors. The E-Stim Systems product line includes 2 mm/TENS, 4 mm, and 10 mm snap connectors, among others. This adapter is specifically designed for the latter combination:
connecting an electrode with a 10 mm snap connector to a cable with a 4 mm banana plug.
For example, the adapters are compatible with the
E-Stim Systems Electro Cock Straps. These conductive fabric straps feature a 10 mm snap connector and, when used with these adapters, become compatible with a 4 mm e-stim cable. E-Stim Systems includes the same type of adapter with the Electro Cock Straps. :contentReference[oaicite:1]{index=1}
Specially Designed for Electrostimulation
Not every adapter that looks the same is technically identical. This is an important consideration when it comes to 10 mm snap connectors. Similar adapters are also used with antistatic wristbands and other non-e-stim applications.
According to E-Stim Systems, such inexpensive antistatic adapters often contain a
current-limiting resistor. This is undesirable for electrostimulation because the resistor affects the operation of the connected controller.
The official
E-Stim Systems 10 mm Snap Adapters do not contain this current-limiting resistor. This allows the connected e-stim controller to deliver its output signal to the electrode without such a built-in limitation. So, it’s a tiny component, but one where the technology behind the blue casing is more important than you might expect at first glance. :contentReference[oaicite:2]{index=2}
Sold as a pair
The package contains
two 10 mm snap adapters. This is designed for use with monopolar electrodes such as the Electro Cock Straps, which require two separate contact points to form an electrical circuit.
You can use two compatible electrodes, but depending on your setup, a monopolar electrode can also be combined with another suitable electrical contact point. Always check in advance which connector your electrode, cable, and power box use.
When do you need these adapters?
This set is the right choice when you have a
10 mm snap connector on one end and a
4 mm banana plug on the other. The adapter only changes the physical connection; it does not convert a 4 mm cable into a different type of e-stim controller and does not generate an electrical signal itself.
If you have an electrode with a 2 mm/TENS connector, you’ll need a different type of adapter. Be sure to check your electrode’s connector before ordering. With e-stim, a difference of just a few millimeters can mean the difference between connecting right away and looking dejectedly at two plugs that simply refuse to connect.
General Features
- Brand: E-Stim Systems
- Product: 10 mm Snap Adapters
- Type: E-stim connection adapters
- Contents: 2 adapters
- For electrodes with a 10 mm snap connector
- Suitable for cables with 4 mm banana plugs
- 10 mm snap to 4 mm connector
- Used with, among other things, E-Stim Systems Electro Cock Straps
- Specially designed for electrostimulation
- No built-in current-limiting resistor
- Sold as a pair
- 12-month manufacturer’s warranty according to E-Stim Systems’ terms and conditions
FAQ
What are the E-Stim Systems 10 mm Snap Adapters used for?The adapters allow you to connect an electrode with a 10 mm snap connector to an e-stim cable with a 4 mm banana plug. They are used, among other things, with the E-Stim Systems Electro Cock Straps.
How many E-Stim Systems 10 mm Snap Adapters are included?You’ll receive two adapters. This gives you a complete pair for applications where two 10 mm snap connectors need to be connected to 4 mm plugs.
Can I use standard 10 mm snap adapters instead of the E-Stim Systems 10 mm Snap Adapters?That is not advisable without checking the technical specifications. Some adapters designed for antistatic applications contain a current-limiting resistor. E-Stim Systems states that such adapters do not function properly with electrostimulation devices. E-Stim Systems’ own adapters do not contain this resistor. :contentReference[oaicite:3]{index=3}
Do the E-Stim Systems 10 mm Snap Adapters fit a 2 mm/TENS cable?No. This version is designed to connect a 10 mm snap connector to a
4 mm plug. Other adapters are available for 2 mm/TENS cables.
With the
E-Stim Systems 10 mm Snap Adapters, you can easily connect electrodes with a 10 mm snap connector to your 4 mm e-stim cables. Small enough to fit in any accessory compartment, yet useful enough that you won’t want to lose them. Your order will be shipped quickly and in completely discreet packaging.
