A remote control that not only adjusts the volume but also responds to movement and sound? The
E-Stim Systems Remote System Electrosex Powerbox turns wireless electroplay into a game where distance, silence, and even an unexpected movement can become part of the excitement. The compact powerbox features 10 different programs, 27 digitally controlled intensity levels, and a wireless key fob with a range of up to approximately 100 meters under favorable conditions.
But that’s not all. A built-in motion sensor can respond as soon as the wearer moves, while two audio modes allow the electrical stimulation to react to sound. With the Learn function, you can also pair multiple remote controls and power units. One controller for multiple receivers, multiple controllers for one receiver: suddenly, the concept of “letting go of control” takes on a very literal meaning.
Remote Electroplay
The heart of the system consists of a compact
E-Stim powerbox with a wireless key fob. The remote control communicates with the power unit via a digitally encoded 433 MHz radio signal.
Under suitable conditions, the wireless range is approximately
100 meters at most, according to E-Stim Systems. Walls, buildings, and other environmental factors can reduce the actual range.
The key fob has four clearly labeled buttons: Up, Down, Adjust, and Fire. These buttons not only let you control the intensity but also allow you to adjust the characteristics of the output signal within various programs.
This means you don’t have to stand next to the power box the whole time. Attach the compact receiver—with its built-in belt clip—to a belt, strap, or waistband, and control shifts to the person holding the key fob.
10 programs and 27 intensity levels
The Remote System features
10 different modes, including Fire, Continuous, Pulse, Motion, and Training. The system also offers two motion-controlled and two audio-controlled programs.
The output strength is digitally controlled across
27 levels. E-Stim has designed the steps so that the intensity can be gradually increased. Within the programs, up to
7 adjustment levels are also available to further modify the character of the pulse.
The Remote utilizes E-Stim Systems’
Dynamic Waveform System. As the setting changes, not only can the intensity increase, but the character of the electrical output signal also plays a role in the experience.
Motion Mode: Movement Has Consequences
One of the most striking features is the built-in
motion sensor. This technology was already included in the original E-Stim Remote and, according to E-Stim Systems, was a world first for an electroplay control unit at the time.
In the Motion programs, movement of the power unit can trigger a response. For example, attach the unit to the wearer using the belt clip, and movement suddenly becomes part of the play.
This gives “standing still” an entirely new meaning. And if the wait for movement takes a little too long, the remote control has a
Fire button that allows the controller to intervene directly. A small button with surprisingly little patience.
Audio Mode: Sound as a Trigger
In addition to movement, the E-Stim Remote can respond to
sound. The power box has a built-in microphone and two audio modes with different sensitivity settings.
According to E-Stim Systems, the microphone is sensitive enough to detect, for example, a clap from a few meters away. This allows you to incorporate sound into the game without connecting a separate audio cable.
A clap, a voice, or music near the microphone—it opens up possibilities that aren’t immediately obvious with a conventional, manually operated powerbox. The room suddenly becomes part of the control panel.
Training Mode with Four Levels
The
Training Mode operates with four preset levels:
25%, 50%, 75%, and 100%. This allows you to switch between distinctly different output levels using the remote control.
Careful preliminary adjustment is especially important for this feature. First, test which intensities feel comfortable and safe before letting someone else take over the wireless control. After all, a percentage on a display says less than what the connected electrode and its placement actually feel like.
Learn Mode: One Keyfob, Multiple Power Boxes
Normally, each keyfob is digitally paired to its own receiver. As a result, another remote control cannot simply operate your power box.
With the built-in
Learn Mode, you can intentionally change that configuration. A single keyfob can be paired with multiple power units. Conversely, a single power unit can be programmed to respond to multiple keyfobs.
This makes the Remote ideal for more elaborate sessions. A single controller can operate multiple units, while in another setup, you can grant multiple people access to the same powerbox. The technology remains compact; the scenario certainly doesn’t have to be.
One powerful channel with a 3.5 mm connector
The E-Stim Remote System is a single-channel powerbox. The unit features a single heavy-duty
3.5 mm output. The included cable runs from this 3.5 mm connector to two 2 mm/TENS connectors.
This allows you to use the four included self-adhesive electrode pads right away. Suitable E-Stim cables and adapters are available for electrodes with other connectors.
According to the manufacturer, the Remote is powerful enough to work with the entire range of E-Stim Systems electrodes, even very large models like the Decimator. This means the system isn’t limited to the pads you start with out of the box.
Biphasic, current-limited output
Behind its playful design lies serious electronics. The Remote uses a microprocessor-controlled voltage generator and a
biphasic, current-limited pulsed AC output with dynamic waveforms.
E-Stim Systems manufactures its control units in the United Kingdom and equips them with built-in safety features, including current limiting. According to the manufacturer, the Remote is designed in accordance with relevant British and European safety regulations and bears the UKCA and CE markings.
Compact and fully battery-powered
You don’t need a power outlet for the power unit. It runs on a standard
9V alkaline PP3 battery, which is included in the set. The key fob uses a compact
CR2032 button cell, also included.
The power box measures approximately 112 × 65 × 41 mm and weighs about 146 grams with the battery. The key fob is considerably smaller at approximately
33 × 59 × 8 mm and weighs about 17 grams.
Thanks to the built-in belt clip, the power unit can be attached to clothing, a belt, or a suitable strap. This fits perfectly with the concept: the electronics largely disappear from view, while the wireless control takes center stage.
A Complete Starter Kit
E-Stim Systems does not sell the Remote as a bare power box. The package includes the accessories you need to set up a complete basic setup right away. If you want to use metal insertables, cock loops, straps, or other E-Stim electrodes later on, check which cable and connector the specific accessory requires.
- E-Stim Remote power unit
- Wireless key fob transmitter
- CR2032 battery for the key fob
- 9V alkaline PP3 battery for the power unit
- 3.5 mm to 2 mm/TENS output cable
- 4 self-adhesive electrode pads
- Protective carrying and storage case
- Quick User Guide
Safe Play with Wireless Control
Wireless control makes clear agreements especially important. Test the electrodes, placement, and intensity level together first before actually handing over the remote control. The person receiving the stimulation must always have a clear way to stop the session immediately.
Connect the electrodes while the power unit is turned off and start each new combination at a low intensity. Increase the intensity gradually. Use electrostimulation in accordance with E-Stim Systems’ safety instructions; avoid current paths through the chest area and do not use electrodes around the head and neck.
Do not use e-stim with a pacemaker, other electronic implant, or when a medical condition makes electrical stimulation unsuitable. Read the included manual carefully before first use.
General Features
- Brand: E-Stim Systems
- Model: E-Stim Remote System
- Type: wirelessly controlled electrosex power box
- Number of channels: 1
- Output: heavy-duty 3.5 mm socket
- 10 program modes
- Includes Motion modes
- Includes 2 Audio modes
- Built-in motion sensor
- Built-in microphone
- 27 digitally controlled output levels
- Up to 7 adjustment levels within the programs
- Training Mode with 25%, 50%, 75%, and 100%
- Fire function on the key fob
- Dynamic Waveform System
- Biphasic, current-limited pulsed AC output
- Digitally encoded 433 MHz radio connection
- Wireless range: up to approximately 100 meters under favorable conditions
- Learn Mode for pairing multiple key fobs and power units
- Power unit with fixed belt clip
- LED indicators for power, output, reception activity, and status
- Power unit: approximately 112 × 65 × 41 mm
- Key fob: approximately 33 × 59 × 8 mm
- Power unit weight including battery: approximately 146 grams
- Key fob weight: approximately 17 grams
- Power unit operates on 1 × 9V alkaline PP3 battery
- Keyfob operates on 1 × CR2032 battery
- Batteries included
- Designed and manufactured in the United Kingdom
- UKCA- and CE-marked according to the manufacturer
- Lifetime E-Stim Systems warranty subject to warranty terms and conditions
FAQ
What is the range of the E-Stim Remote System Electrosex Powerbox?E-Stim Systems specifies a maximum wireless range of approximately 100 meters under favorable conditions. The actual range may be shorter due to walls, buildings, and other environmental factors. Communication occurs via a digitally encrypted 433 MHz radio connection.
Does the E-Stim Remote System Electrosex Powerbox really respond to motion and sound?Yes. The power unit has a built-in motion sensor and microphone. Among the 10 programs are two Motion modes and two Audio modes. This allows the output to respond to motion or detected sound, depending on the selected program.
Can I use multiple E-Stim Remote System Electrosex Powerboxes with a single remote control?Yes. Using Learn Mode, a single key fob can be paired with multiple Remote power units. Conversely, a single power unit can also respond to multiple paired key fobs. By default, a key fob is digitally paired with its own receiver.
What’s included with the E-Stim Remote System Electrosex Powerbox?The set includes the Remote power unit, wireless keyfob, 9V battery, CR2032 battery, a 3.5 mm to 2 mm/TENS cable, four self-adhesive electrode pads, a protective carrying case, and a quick start guide. This gives you the basics you need to get started right away after reading the instructions.
With the
E-Stim Remote System, control shifts from the powerbox to a small device on your keychain—and movement, sound, and distance suddenly take on an electric role. We carefully package the complete set and ship it to you quickly and discreetly.
